Data checked November 16, 2026.
First decide who should handle an alarm: you and your chosen contacts, or a professional monitoring service. Ask the provider to identify app access and central-station monitoring separately in its proposal. Our monitoring guide explains the response arrangements.
VISTA-20P monitoring paths and prerequisites
| Approach | Panel revision check | Communicator and service | What still needs confirmation | Sources |
|---|---|---|---|---|
| Resideo AlarmNet / Total Connect 2.0 | The LTEM-PA/PV data sheet lists VISTA-20P v9.12+. | LTEM-PA uses AT&T; LTEM-PV uses Verizon. Resideo lists cellular with Ethernet or optional Wi-Fi. Total Connect service requires a subscription and dealer enablement. | Have the provider confirm the exact module, enabled communication paths, reception at the installation, and services in the selected plan. | Resideo LTEM-PV product record Resideo LTEM-PA/PV data sheet Resideo LTE communicator compatibility chart |
| Alarm.com through a VISTA-compatible SEM | Alarm.com lists manufacture in 2005 or later AND panel firmware 3.1+. | As a provider-specific example, Alarm Grid lists ADC-SEM300-VT-AT and ADC-SEM300-VT-VZ for its VISTA-20P takeover service. | Those SKU listings describe Alarm Grid’s offering checked November 16, 2026. Ask your intended provider to confirm its accepted module, activation, and plan. | Alarm.com panel and module compatibility Alarm.com SEM overview Alarm Grid’s own takeover requirements |
| EyezOn through EnvisaLink 4 (EVL4) | EyezOn lists Vista20P; the opened product and setup documents do not state a minimum panel revision. | EVL4 connects to the panel’s keypad bus and uses Ethernet. Setup requires an EyezOn account, Honeywell activation, and panel programming. | Ask EyezOn to confirm your exact board revision. Confirm any central-station service and additional cellular equipment separately. | EyezOn EnvisaLink 4 product record EyezOn Honeywell installation guide EyezOn services and product selector |
Use these rows to shortlist an assessment, not to approve an installation. The revision conditions belong to their named approaches. An unspecified minimum revision is unknown, not proof that every older board qualifies.
Identify what is already installed
Ask the installer or proposed monitoring provider to record the following before changing programming or ordering equipment:
- The control-panel model, board or PROM revision, and the date shown on the equipment.
- The communicator’s exact model, carrier where applicable, current provider, and activation status.
- Keypad models and any other communication modules connected to the panel.
- The zones, partitions, and functions you want retained.
- The available Ethernet connection, proposed internet or cellular paths, and backup-power arrangements.
Keep access codes, account credentials, and full device identifiers out of public posts. For ownership, previous-account, and reuse questions, use the existing-alarm guide alongside this model comparison.
Check the prerequisites that are easy to overlook
For LTEM-PA/PV, Resideo specifies an optional PROWIFIZW module for Wi-Fi. Ethernet and Wi-Fi are alternative internet connections, not two simultaneous internet paths. Ask which paths will actually be installed and enabled; a product’s available features are not a description of your service package.
Sources: Resideo LTEM-PV product record Resideo LTEM-PA/PV data sheet.
For a VISTA SEM, Alarm.com identifies a telephone POTS line as incompatible and says the SEM should be the sole alarm-signaling path to the monitoring station. Its guidance also requires SEM version 1.60+ for voice or talking keypad compatibility. Have the installer check the existing devices and module version before a changeover.
Sources: Alarm.com SEM incompatible devices.
For EVL4, EyezOn requires activation as a Honeywell device before connection so the module receives the appropriate firmware. Its setup guidance also requires review of shadowing settings when an existing IP, GSM, or long-range-radio module remains installed. Ask the installer to document that configuration and verify event reporting.
Sources: EyezOn Honeywell installation guide EyezOn Honeywell programming requirements.
EyezOn advertises professional central-station monitoring separately over IP or LTE. Confirm the current service, hardware, availability, and terms directly with EyezOn rather than assuming that registering an app account enrolls that service.
Sources: EyezOn services and product selector.
Get the activation and response plan in writing
- Which alerts go to my phone, which go to a monitoring station, and who handles each event?
- Does the selected plan include the app and communication paths I want?
- Does an existing communicator need release from another account, or replacement? Who confirms that?
- Who will set up the new authorized users and remove previous users?
- What will be tested at activation, including the notification and monitoring paths?
- What remains available during a broadband, cellular, or power interruption, and what limitations apply?
The FTC recommends asking who installs and monitors the system, what happens during a power failure, how monitoring contacts work, and what contract and cancellation conditions apply. Ask local authorities about registration and false-alarm requirements.
Sources: FTC home-security shopping guidance.
Compare the complete written quote
Request an itemized quote for each feasible approach. Use the table below as a worksheet; it contains questions, not preset prices.
| Quote item | Ask the provider | Calculator category |
|---|---|---|
| Communicator and revision work | Which exact parts and labor are included? Is any panel or chip work necessary? | Upfront equipment; installation / activation |
| Activation | What setup or account-activation charges apply? | Installation / activation |
| Ongoing service | What are the monitoring, app, cellular, and other required charges, and how are they billed? | Monthly monitoring; other monthly fees |
| Equipment financing | What are the down payment, monthly payment, and payment duration? | Upfront down payment; monthly equipment payment and duration |
| Contract and exit terms | What are the service term, renewal, moving, and cancellation conditions? | Keep these beside the calculation; do not hide them in an assumed rate |
The FTC recommends obtaining written installation and monitoring costs, the contract period, warranty, and cancellation information before signing. Enter your actual quoted amounts in the home-security cost calculator over the same comparison period. Avoid counting financed equipment as both a full upfront purchase and monthly payments. Take the quote checklist to the provider discussion.
Sources: FTC home-security shopping guidance.
This guide is based on published documents. Alarm Cost Guide has not installed or tested these combinations and does not activate or monitor alarms. A provider’s assessment and written agreement must identify the equipment and service it will support.
Sources and document dates
- Resideo LTEM-PV product record — document date: undated; checked November 16, 2026.
- Resideo LTEM-PA/PV data sheet — document date: 2021-08; checked November 16, 2026.
- Resideo LTE communicator compatibility chart — document date: 2026-06; checked November 16, 2026.
- Alarm.com panel and module compatibility — document date: undated; checked November 16, 2026.
- Alarm.com SEM overview — document date: undated; checked November 16, 2026.
- Alarm.com SEM incompatible devices — document date: undated; checked November 16, 2026.
- Alarm Grid’s own takeover requirements — document date: 2018-03-29 (original answer; last-update date not stated); checked November 16, 2026.
- EyezOn EnvisaLink 4 product record — document date: undated; checked November 16, 2026.
- EyezOn Honeywell installation guide — document date: undated; checked November 16, 2026.
- EyezOn Honeywell programming requirements — document date: undated; checked November 16, 2026.
- EyezOn services and product selector — document date: undated; checked November 16, 2026.
- FTC home-security shopping guidance — document date: 2023-12; checked November 16, 2026.
Product documents describe named equipment. Provider pages describe that provider’s own offering. Undated means no publication or revision date was exposed by the opened source.